3 guys want to watch someone brew all-grain

Gjoseph · Post by **Gjoseph** » Mon Oct 24, 2011 5:57 pm

We met tonight and realized we need to watch someone brew so we can take notes and figure out what we really need for equipment. Anyone brewing soon and wants to teach two new recruits to the club and a long time extract brewer?

Gjoseph · Post by **Gjoseph** » Mon Oct 24, 2011 6:08 pm

Oh I usually don't get online on the weekend much can you text me - 319-721-9235

tony b · Post by **tony b** » Mon Oct 24, 2011 7:04 pm

"I like to watch!" Chance, the Gardener (from the movie Being There with Peter Sellers)

carrisr · Post by **carrisr** » Tue Oct 25, 2011 8:15 am

I will not be brewing this weekend, but I'll probably brew the following one, the 5th or 6th. If that would work let me know and we can work out what day/time. My setup is pretty basic and cheap/easy to get started with. From there you can upgrade a lot of different ways if you choose to later.

Another option, if you can wait that long: We could do the January Tech meeting on basic all-grain. I know there are a few others who are considering the switch too. We wouldn't be able to do an actual brew session though unless we moved the meeting to the weekend. If there is enough interest in that we could do it.

On Monday 24 October 2011 7:08:01 pm you wrote:

Oh I usually don't get online on the weekend much can you text me -
319-721-9235

Post generated using Mail2Forum (http://www.mail2forum.com)

Gjoseph · Post by **Gjoseph** » Tue Oct 25, 2011 9:54 am

carrisr wrote:I will not be brewing this weekend, but I'll probably brew the following one, the 5th or 6th. If that would work let me know and we can work out what day/time. My setup is pretty basic and cheap/easy to get started with. From there you can upgrade a lot of different ways if you choose to later.

Another option, if you can wait that long: We could do the January Tech meeting on basic all-grain. I know there are a few others who are considering the switch too. We wouldn't be able to do an actual brew session though unless we moved the meeting to the weekend. If there is enough interest in that we could do it.

I will mention both options, I am thinking the 5th or 6th is definately a possibility and even if we couldn't hold off until Jan we could probably still benifit from a tech meeting regarding any questions we may have encountered. I will let you know what works and get back to you.

davidw · Post by **davidw** » Tue Oct 25, 2011 11:04 am

I am toying with the idea of doing a couple small "research" batches on the stove top the second weekend in November using a simple set up consisting of a 5 gallon cooler with a SS braid as a mash tun and my old 5 gallon stock pot. This is probably about as easy as it gets. If you are interested I can post once I finalize the date and you are more than welcome to come watch. This would probably be the best situtation for someone wanting to learn the process. When I do 10 gallon batches on my two tier system in the garage I'm pretty heads-down and focused on what I am doing and would likely be less attentative to Q&A.

david

tompb · Post by **tompb** » Tue Oct 25, 2011 5:30 pm

11-5-11 is teach a friend to brew day. Does the club want to try and set something up for this?

Matt F · Post by **Matt F** » Wed Oct 26, 2011 8:02 am

I had mentioned that before but I am not available that weekend. Here is the link to the AHA info. We should try to get something more formal together for this. We once participated with three different people including myself brewing in BA's garage. It was a good time.
http://www.homebrewersassociation.org./ ... mebrew-day

Gjoseph · Post by **Gjoseph** » Wed Oct 26, 2011 8:10 am

At least one of the other guys can do the 6th. The 5th is out mainly because of the 11 am Iowa game against Michigan. So if the 6th is an option you would have at least 2 that would be interested. If you do decide to brew on the 6th let me know.

Gjoseph · Post by **Gjoseph** » Wed Oct 26, 2011 10:07 am

All three of us are in for the 6th if you decide to do it then.

Thank you,
Greg

carrisr · Post by **carrisr** » Wed Oct 26, 2011 1:43 pm

OK let's do it. What time can you guys be here? I'd prefer not to start much later than noon as my brew days tend to run aorund 4 hours.

If anyone else wants to learn all-grain or even getting started you are welcome. I know it's a day aafter the AHA day, but oh well.

My address is:
10502 246th Ave
Anamosa, IA 52205

On Wednesday 26 October 2011 11:07:55 am you wrote:

All three of us are in for the 6th if you decide to do it then.

Thank you,
Greg

Post generated using Mail2Forum (http://www.mail2forum.com)

Gjoseph · Post by **Gjoseph** » Thu Oct 27, 2011 7:09 am

Noon sounds good, we will see if we can't get there a little earlier.

Thanks!

carrisr wrote:OK let's do it. What time can you guys be here? I'd prefer not to start much later than noon as my brew days tend to run aorund 4 hours.

If anyone else wants to learn all-grain or even getting started you are welcome. I know it's a day aafter the AHA day, but oh well.

My address is:
10502 246th Ave
Anamosa, IA 52205

Gjoseph · Post by **Gjoseph** » Sun Nov 06, 2011 8:58 am

So my wife threw me a surprise bday party last night. I am pretty sure I still can't drive and think my bed may be a haven for me. we will see if I make it but you may be brewing on your own... Sorry!

carrisr · Post by **carrisr** » Sun Nov 06, 2011 10:00 am

Do you know if the other two friends are planning to make it?

Mr T · Post by **Mr T** » Sun Nov 06, 2011 12:12 pm

Happy birthday again..I was betting you were not going to make it to randys today.. did bricks stay open till 3am..then with the time change

Sent from my U.S. CellularÂ® Android phone

Reebekili <brew-brewing@crbeernuts.org> wrote:

So my wife threw me a surprise bday party last night. I am pretty sure I still can't drive and think my bed may be a haven for me. we will see if I make it but you may be brewing on your own... Sorry!

Post generated using Mail2Forum (http://www.mail2forum.com)

Cedar Rapids Brewing Society