http://morebeer.com/index?a_aid=hbf&chan=dod
The More Beer deal of the day is a Chillus Convolutus CFC for $165 (regularly $189). I have one and love it. I highly recommend it for anyone thinking about buying a counter-flow chiller. It also doubles nicely as a heat exchanger in a HERMS system (i.e. instead of putting a coil in the HLT).
More Beer - Chillus Convolutus Sale
More Beer - Chillus Convolutus Sale
Got one!!! Thanks Doc! I want to connect QDs to the wort side. How did u do it? Solder on NPT fitting?
Paul On Jan 24, 2013 11:43 AM, "DrPaulsen" <brew-equipment@crbeernuts.org (brew-equipment@crbeernuts.org)> wrote:
Paul On Jan 24, 2013 11:43 AM, "DrPaulsen" <brew-equipment@crbeernuts.org (brew-equipment@crbeernuts.org)> wrote:
Post generated using Mail2Forum (http://www.mail2forum.com)http://morebeer.com/index?a_aid=hbf&chan=dod
The More Beer deal of the day is a Chillus Convolutus CFC for $165 (regularly $189). I have one and love it. I highly recommend it for anyone thinking about buying a counter-flow chiller. It also doubles nicely as a heat exchanger in a HERMS system (i.e. instead of putting a coil in the HLT).
More Beer - Chillus Convolutus Sale
I just slide 1/2" silicone tubing over the bare pipe. It works very well. I planned out my system such that I would very rarely need to swap out those tubes in the middle of a brew session. Unless I'm using a pre-chiller hop back, the inlet side remains attached to the pump and the outlet is just a piece of tubing with a camlock that can be moved around. I've considered making small sections of tubing with camlock QDs and leaving them attached, but it can be a pain (literally) to disconnect the tubing and accidentally dump boiling wort all over yourself, so I decided to just leave the hoses attached and rarely give myself a reason to move them.
On Thu, Jan 24, 2013 at 12:15 PM, prieff <brew-equipment@crbeernuts.org (brew-equipment@crbeernuts.org)> wrote:
On Thu, Jan 24, 2013 at 12:15 PM, prieff <brew-equipment@crbeernuts.org (brew-equipment@crbeernuts.org)> wrote:
Post generated using Mail2Forum (http://www.mail2forum.com)Got one!!! Thanks Doc! I want to connect QDs to the wort side. How did u do it? Solder on NPT fitting?
Paul On Jan 24, 2013 11:43 AM, "DrPaulsen" brew-equipment@crbeernuts.org (brew-equipment@crbeernuts.org))> wrote: : http://morebeer.com/index?a_aid=hbf&chan=dod
The More Beer deal of the day is a Chillus Convolutus CFC for $165 (regularly $189). I have one and love it. I highly recommend it for anyone thinking about buying a counter-flow chiller. It also doubles nicely as a heat exchanger in a HERMS system (i.e. instead of putting a coil in the HLT).
I picked this up about a year ago on same deal. While not quick disconnects, I followed the electric brewery build:
http://theelectricbrewery.com/wort-chiller?page=3
http://theelectricbrewery.com/wort-chiller?page=3
I am absolutely sold on the immersion chiller with a wort return. Cheaper too. I use it as a HERMS in my HLT also. Makes an awesome whirlpool and chills the entire volume below 100F in just a few minutes on a 10 gallon batch.
http://morebeer.com/view_product/8909
http://morebeer.com/view_product/9147/1 ... Option_Two
http://morebeer.com/view_product/8909
http://morebeer.com/view_product/9147/1 ... Option_Two
Matt Franklin
Slappy Brewing North
On Tap:
American IPA
Strata Hazy IPA
Dr. Lee Orval
American Strong Ale
Friend of the Devil Belgian Golden Strong
Imperial Stout
Slappy Brewing North
On Tap:
American IPA
Strata Hazy IPA
Dr. Lee Orval
American Strong Ale
Friend of the Devil Belgian Golden Strong
Imperial Stout