Induction cooktops

Discussions about brewing equipment / design.
User avatar
czubak
Posts: 940
Joined: Thu Feb 06, 2014 9:12 am
Location: SW CR

Induction cooktops

Post by czubak »

Anyone use them? I've been on the never ending "how do I want to brew" quest and these seem to be gaining a lot of popularity in the homebrew community.

HLT and BK use and I'd still use my cooler for a MT

http://www.webstaurantstore.com/avantco ... 8*240.html

Image


Sent from my iPhone using Tapatalk
Chris Zubak
User avatar
Matt F
Posts: 3771
Joined: Mon Feb 13, 2006 9:09 pm
Location: Cedar Rapids, IA

Re: Induction cooktops

Post by Matt F »

There was an article in BYO March/April 2014 about these. No experience myself.
http://byo.com/stories/issue/item/2967-induction-heat
Matt Franklin
Slappy Brewing North

On Tap:
American IPA
Strata Hazy IPA
Dr. Lee Orval
American Strong Ale
Friend of the Devil Belgian Golden Strong
Imperial Stout
User avatar
czubak
Posts: 940
Joined: Thu Feb 06, 2014 9:12 am
Location: SW CR

Re: Induction cooktops

Post by czubak »

Thanks Matt. I'm liking this


Sent from my iPhone using Tapatalk
Chris Zubak
User avatar
daryl
Posts: 1621
Joined: Thu Jan 16, 2014 11:07 pm
Location: Springville, IA

Re: Induction cooktops

Post by daryl »

I think I am liking this too.

I have a corner in the cellar...not pretty, but a concrete floor. It has plumbing (former washer faucets) and a 220 V outlet; and a window to vent the steam if needed.

The induction plate, a utility sink, and maybe a newer kettle...and I think I would be in business. AND....heat could be auto controlled with a temp sensor and controller.....just read it has temperature control...with a little calibration, might not need a controller.

It sure would be nice to have a setup where I am not carrying carboys up and down the basement stairs.

Does anyone have any experience brewing with this type of heat source?

Thanks guys!
In the Fridge/On Tap: English Bitter, Schwarzbier, Cream Ale
In the keg: Wheat Beer, Russian Imperial Stout
In the bucket:
In the queue: Irish Red, American IPA
bf514921
Posts: 628
Joined: Tue Jan 10, 2012 9:32 pm
Location: Near Prairieburg, IA

Re: Induction cooktops

Post by bf514921 »

If you have the 220 you could always go electric of some kind, bow you fixed for ventalation?
Brandon Franklin - The other Franklin
User avatar
daryl
Posts: 1621
Joined: Thu Jan 16, 2014 11:07 pm
Location: Springville, IA

Re: Induction cooktops

Post by daryl »

I have the usual basement windows....could get a small fan on one to draw more moist air out.
In the Fridge/On Tap: English Bitter, Schwarzbier, Cream Ale
In the keg: Wheat Beer, Russian Imperial Stout
In the bucket:
In the queue: Irish Red, American IPA
User avatar
Matt F
Posts: 3771
Joined: Mon Feb 13, 2006 9:09 pm
Location: Cedar Rapids, IA

Re: Induction cooktops

Post by Matt F »

Fan in the window may be all you need. If you find condensation forming on the ceiling you can add a hood then. Could even be painted wood. I am a fan of my galvanized ductwork hood. Pretty cheap and effective. I don't think you will need it though.
Matt Franklin
Slappy Brewing North

On Tap:
American IPA
Strata Hazy IPA
Dr. Lee Orval
American Strong Ale
Friend of the Devil Belgian Golden Strong
Imperial Stout
User avatar
crcyclone87
Posts: 112
Joined: Tue Jul 30, 2013 2:05 am
Location: Ely, Iowa
Contact:

Re: Induction cooktops

Post by crcyclone87 »

I use an induction cooktop with my BIAB method brewing 2.5 gallon batches. My unit is a 1800W 120V cooktop. I brew in the basement during the winter and out on the deck in the summer. I just plug into any 120 outlet. I have not had any problem with condensation while brewing in the basement. I usually just boil off about 1/2 gallon but that does not create a problem in a low humidity house during the winter. It makes the basement smell like hops which I think is great. The wife, not so much. One negative with my unit is that there only 10 temperature settings from 140-460F. Setting 1 = 140F, setting 2 = 180F. It has taken a little practice keeping a constant mash temperature. I looks like the 3400W 240V unit in the picture has temperature settings in 10 degree increments which would be nice. My 1800W unit does an adequate job heating up the 2.5 gallons batches to boiling and I have done a couple 5 gallons batches last summer on the deck using a mash tun cooler and batch sparged. As soon as I started collecting wort in the brew kettle, I set the cooktop to high while I heated the sparge water on the stove and carried it out to the deck which was a PITA but it worked. It saved a little time getting the wort to boiling. Another thing to remember with an induction cooktop is the kettle has to be magnetic. Regular stainless will not work. The kettle has to have a tri-ply bottom.
Cal Corrin
House Divided Brewery
User avatar
czubak
Posts: 940
Joined: Thu Feb 06, 2014 9:12 am
Location: SW CR

Re: Induction cooktops

Post by czubak »

Thanks a bunch. I verified my stainless kettle is magnetic so that's covered.


Sent from my iPad using Tapatalk
Chris Zubak
whitedj
Posts: 654
Joined: Wed Jan 25, 2012 8:53 pm
Location: Marion

Re: Induction cooktops

Post by whitedj »

Typically I think cold working in the manufacturing process is good enough for most ss pots.
The guy who submitted a barley wine in the Furious competition...
User avatar
johnnyik
Posts: 197
Joined: Wed Jul 07, 2010 10:51 am
Location: Center Point, IA

Re: Induction cooktops

Post by johnnyik »

Just finished my new indoor brewery, brewed a red lager two weeks ago and a kolsch last week. I use 2 Burton 220V induction burners. I use 2800 watts on the HLT to get the water heated, takes about 30 minutes to get 5 gal to 165deg. I use 2600 watts to get the boil going then keep it at a nice rolling boil with only 2000 watts. The burners work awesome!! I had to buy new pots, 2 10 gal Mega pots from NB, but perfect marriage so far. Go with the induction burners, you won't be sorry. I researched the Avantco burners as well and almost got those. I went with the Burton because I could get them directly from Amazon which has a reputable return policy. Here's pictures:
Attachments
IMG_0049.JPG
(1.27 MiB) Downloaded 1438 times
IMG_0044.jpg
(1.67 MiB) Downloaded 1432 times
IMG_0042.JPG
(1.55 MiB) Downloaded 1430 times
John Eikenberry
User avatar
czubak
Posts: 940
Joined: Thu Feb 06, 2014 9:12 am
Location: SW CR

Re: Induction cooktops

Post by czubak »

Haven't seen them yet. ~$80-90 more and 3000 watts vs 3500 of the Avantco. Thanks and that's a nice setup. What are you venting with or better yet, how are you dealing with the humidity?


Sent from my iPad using Tapatalk
Chris Zubak
User avatar
Matt F
Posts: 3771
Joined: Mon Feb 13, 2006 9:09 pm
Location: Cedar Rapids, IA

Re: Induction cooktops

Post by Matt F »

Congrats on getting it fired up Johnny. I know you have been looking in to this for a while.
Matt Franklin
Slappy Brewing North

On Tap:
American IPA
Strata Hazy IPA
Dr. Lee Orval
American Strong Ale
Friend of the Devil Belgian Golden Strong
Imperial Stout
User avatar
czubak
Posts: 940
Joined: Thu Feb 06, 2014 9:12 am
Location: SW CR

Re: Induction cooktops

Post by czubak »

Someone needs to host a brew day so we can check this out [emoji106][emoji482]


Sent from my iPhone using Tapatalk
Chris Zubak
User avatar
daryl
Posts: 1621
Joined: Thu Jan 16, 2014 11:07 pm
Location: Springville, IA

Re: Induction cooktops

Post by daryl »

Thanks for the post Johnny, it has answered many questions I had.

It looks like your new kettle's diameter exceeds the recommended maximum for the induction heater.

I do not think that a few inches of overage makes much of a difference.

It seems your experience in the time it takes to heat water has been favorable.
In the Fridge/On Tap: English Bitter, Schwarzbier, Cream Ale
In the keg: Wheat Beer, Russian Imperial Stout
In the bucket:
In the queue: Irish Red, American IPA
Locked