Wort Rally 2017 - Information

[bf514921]

Boiled the heck out of it, among other things

Sent from my LG-US780 using Tapatalk

[daryl]

When I dumped my wort into the kettles, I had a grey sediment in the bottom....the color of tarnished aluminum...not that I think it is aluminum.

Did anyone else see that?

I did have my wort refrigerated for two days, so it could have precipitated out.

[carrisr]

I had a fair amount of something too.

Sent from my Nexus 5X using Tapatalk

[andrewmaixner]

When I dumped my wort into the kettles, I had a grey sediment in the bottom....the color of tarnished aluminum...not that I think it is aluminum.
Did anyone else see that?
I did have my wort refrigerated for two days, so it could have precipitated out.

Trub, precipitated protein from when they heated then cooled it. probably only a portion of what you get from a hopped full boil, as there was no hop acids nor boil to change the chemical form.

[karl]

Yep. Trub. I had it too. Seemed to act like protein in the early boil clinging with other hot break and was easily skimmed off the top.

Sent from my Pixel XL using Tapatalk

[fargo41]

They use very protein rich malt.

I recirculate while chilling and ended up with this photo after it chilled.

[karl]

Since I had corny kegs as the pick-up vessels, I ended up with only about 9-1/4 gallons of wort. This diluted to 11 gallons for before the boil ended up with a pre-boil gravity of 1.047 and a post-boil gravity of about 1.055. The idea is to make a light summer APA with Thai basil, lemongrass and citra hops. (Magnum was used as a clean bittering hop.) If all goes well it will be called 'Crouching Lion, Hidden Kitten' and hopefully will go to NHC and other fests.

Sent from my Pixel XL using Tapatalk

[andrewmaixner]

They use very protein rich malt.

I recirculate while chilling and ended up with this photo after it chilled.

That reminds me, i turned my back as it approached boil, and ended up boiling over the 11 gallons in a 21 gallon pot!

[wyzzyrdd]

That reminds me, i turned my back as it approached boil, and ended up boiling over the 11 gallons in a 21 gallon pot!

I don't feel so bad about boiling over a 15 gallon pot then.

[daryl]

That reminds me, i turned my back as it approached boil, and ended up boiling over the 11 gallons in a 21 gallon pot!

I don't feel so bad about boiling over a 15 gallon pot then.

I too christened my newly purchased, but used, Blichman Top Tier burner. Fortunately, I did not repeat that with my new Hell Fire Blichman.

It's gonna take a little practice getting use to these burners, but they sure to raise the temp faster than my turkey burners.

My kettle will only hold about 7 gallon, didn't want to drag out the keggles.

[wyzzyrdd]

So 11 gallons boiled over a 15 gallon pot. I figure, I was just careless with the heat.

So I figure I can boil 5 gallons in an 8 gallon pot while I am cleaning the scorched wort from the 15 gallon pot. I just need to use a lower setting on the propane burner.

The 8 gallon pot was just as much trouble to clean as the 15.

[tony b]

When I boiled mine after 70 hrs of souring, I had a thick layer of white foam, almost like a meringue, on top of the wort. Not being very experienced in kettle souring, I thought that the pre-boil fermentation with Lacto caused it. Sounds like several folks experienced this too; so, it wasn't from the souring process. But, I caught mine just in time before it topped out my 8 gal kettle. It came right up to the rim.

[jjpeanasky]

I had quite a bit of foam as well with mine.

I only boiled for 15 minutes, with only a small 5min addition to hit 4IBUs and then a whirlpool addition. Pitched the Bootleg Biology MadFermentationist (Mike Tonsmiers) Saison Blend which is supposedly a mix of saison yeast, wild yeast, Brett, and lacto. All hops used were CityHops Centennial whole leaf hops.

- Josh Peanasky

[DJANS]

Had lots of action when it was fermenting but now it's gone quiet. My buddy had lots of blow off


Sent from my iPad using Tapatalk

[tony b]

Pretty normal fermentation for me (White Labs Kolsch - WLP-029), not a big krausen (about 1 1/2") and it's just about finished up after 2 days of active fermentation (with 1 L starter).