July Tech Meeting

carrisr · Post by **carrisr** » Fri Jun 25, 2010 10:50 am

Are we having the tech meeting on July 7th? If so, have we decided on a topic? I know we talked about doing the single hops beer series tasting. I'm going to be going through IC Saturday, so if we need to try and pick those up let me know.

BrewHound · Post by **BrewHound** » Fri Jun 25, 2010 7:21 pm

I don't think we are going to do another tasting yet. We are going to try to spread those out due to the cost assoicated with it. Especially that one as those beers are extremely expensive.

Hell that is something we could do for the tech meeting ourselve with a little prep. TOM BURNS!!! did you finsh your Ferm-wrap yet we could do that if I ordered stuff on Monday.

tompb · Post by **tompb** » Sat Jun 26, 2010 3:36 pm

No I haven't completed it yet. We could do that for the meeting. I also have a temp control box I need to assemble. It wouldn't take to much either.

BrewHound · Post by **BrewHound** » Mon Jun 28, 2010 9:01 am

Ok in an attempt to get TOM BURNS!!! of his ass to make his Ferm Wraps, we are going to build a firm wrap for the meeting.

What do you need from me to do this at the meeting TOM BURN!!!

Also could you send me the information for ordering the supplies, I may build one as well. or post here. Then whom ever is interested in building one at the meeting, can. Should make for an interesting meeting.

tompb · Post by **tompb** » Mon Jun 28, 2010 3:58 pm

Here's the link from where I bought mine.
http://www.beanfarm.com/store/agora.cgi ... ting&xm=on

It takes about a week to get it. I bought 7' ( it's about 38" around a carboy) and 2 sets of connectors. I stole the cords off a couple old VCRs that I threw away. You want to be sure to have a polarized plug (the one with a big and little prong).

I shouldn't need you to do anything....... Well there is that thing you did for me the one night!

DrPaulsen · Post by **DrPaulsen** » Mon Jun 28, 2010 9:01 pm

tompb wrote:I stole the cords off a couple old VCRs that I threw away. You want to be sure to have a polarized plug (the one with a big and little prong).

Why do you need a polarized plug? Since the film is just a big meandering resistor (like an electric hot plate), it's hard for me to understand why polarity would matter.

tompb · Post by **tompb** » Tue Jun 29, 2010 3:52 am

DrPaulsen wrote:
tompb wrote:I stole the cords off a couple old VCRs that I threw away. You want to be sure to have a polarized plug (the one with a big and little prong).
Why do you need a polarized plug? Since the film is just a big meandering resistor (like an electric hot plate), it's hard for me to understand why polarity would matter.

I guess I don't.

Matt F · Post by **Matt F** » Tue Jun 29, 2010 7:06 am

Wow DrPaulsen, what are you, an electrical engineer or something...oh yeah.

tompb · Post by **tompb** » Tue Jun 29, 2010 3:33 pm

I'm just a hack at electronics.... kinda like my brewing.

kurtford · Post by **kurtford** » Tue Jun 29, 2010 5:38 pm

I can bring a box of extra cord ends if you need them, I just cut them off the crap that eventually dies. If I remember right, they all should be a little more heavy duty with the ground plug.

tompb · Post by **tompb** » Tue Jun 29, 2010 7:07 pm

I should be ok on cords. I don't know if anyone else will be building anything or not.

hawkkid68 · Post by **hawkkid68** » Wed Jun 30, 2010 12:52 pm

I'm sure it was in an earlier post but I can't find it. Where is tonight's meeting?
Thanks, Nic

Post generated using Mail2Forum (http://www.mail2forum.com)

carrisr · Post by **carrisr** » Wed Jun 30, 2010 1:52 pm

Nic,
The tech meeting is next Wednesday, the 7th. No meeting tonight. Jeremy will post the location info soon.

BrewHound · Post by **BrewHound** » Wed Jun 30, 2010 1:58 pm

There is no meeting tonight.

The next meeting which is the July tech meeting is held the first Wed of every month. So the next meeting will be on July 7, 2010 at my home (Jeremy Orchuk).

Please PM if you need the address.