JANUARY MEETING
Club Meeting
We discussed the holiday party which was deemed a success by all who attended. Thanks to Jim for hosting.
Specialty comp judges were selected,
The next competition is sweet mead.
We have a new barrel from Templeton. Storage of the barrel was discussed Jeremy Orchuck is going to store and maintain our barrel for the immediate future.
Members will be able to vote on the forum for a RIS recipe for the barrel
We will need 60 gallons of RIS for this project
There was discussion about people who put beer in the barrel being able to take it out, it was agreed that they would
Grain Order
Grain orders were turned in
Tom Burns is coordinating the order and pick up, there were several volunteers to help pick up
When the grain order comes in, you will need to pay for it and pick it up in short time
BYO subscription
It is time to order BYO subscriptions again. Anyone interested needs to let Travis know and will need to pay for it in advance
subscription cost will be $14
Badges are coming
Tap Box
Pottsy, Tom Burns, Brian Anderson are the official committee to make the tap box. Members interested in working on the box should coordinate with them.
Plans will be submitted to cabinet members and then to the club at a meeting in the near future
Tech meeting
Ideas for next meeting were discussed,
First Wednesday of every month
Jeremy will continue to host for the time being
February Meeting
Need a location for the February meeting
Fleck's new distributor
Potential Fundraiser serving beer at grocery store tastings and similar events
may be an opportunity for the club to raise money
Other fundraisers were discussed, and members were encouraged to submit fund raising ideas.
Meeting minutes
-
- Posts: 1236
- Joined: Mon Feb 06, 2006 11:10 am
- Location: Cedar Rapids, IA
Meeting minutes
You can't get with this with a bad hip - Matt
-
- Posts: 20
- Joined: Fri Jan 21, 2011 8:53 am
- Location: Cedar Rapids, IA
What's the time limit for getting BYO orders in? I'd like to get in on the club rate... but I know that's not available unless I'm a member of the club, and I'd like to meet some members of the club before I commit my hard-earned money (and face the wrath of my wife)...
As an aside, I work in Rockwell Collins' main plant, in case there's anyone active in the forums that is there as well.
T. Powersox
As an aside, I work in Rockwell Collins' main plant, in case there's anyone active in the forums that is there as well.
T. Powersox
Meeting minutes
There are seven or eight of us who work for Uncle Rocky, but I can't think of anyone over in Main Plant. Jeremy used to be there, but he hopped over to CS in 131 (or the other new building, I can't keep them straight).
-Jim
On Tue, Feb 1, 2011 at 8:16 PM, semanticdm <brew-meetings@crbeernuts.org (brew-meetings@crbeernuts.org)> wrote:
-Jim
On Tue, Feb 1, 2011 at 8:16 PM, semanticdm <brew-meetings@crbeernuts.org (brew-meetings@crbeernuts.org)> wrote:
Post generated using Mail2Forum (http://www.mail2forum.com)What's the time limit for getting BYO orders in? I'd like to get in on the club rate... but I know that's not available unless I'm a member of the club, and I'd like to meet some members of the club before I commit my hard-earned money (and face the wrath of my wife)...
As an aside, I work in Rockwell Collins' main plant, in case there's anyone active in the forums that is there as well.
T. Powersox
Meeting minutes
Mr. Powersox,
We look forward to meeting you, and I’m sure from what I know your conference room (3rd base) will get you set for any wrath of your wife. We have lots of Rockwellians in the club, so I’ll have to confirm with them if its hard earned money or not. But if it is, I have their hard earned money and this years welcome packet for the club BYO bulk discount in front of me. I’d love to have you on it, but I also know I need to expedite this as several folks don’t want to miss the next centerfold issue…on a side note, it would be funny to have a fold out page with a beer and its stats….
Sorry I digress, anyways if you want to join, and I believe you will, then I can try and meet you sometime soon to get info and payment, if not the brew club is still worth it and before you know it, we will be running another BYO drive.
From: semanticdm [mailto:brew-meetings@crbeernuts.org]
Sent: Tuesday, February 01, 2011 8:16 PM
To: brew-meetings@crbeernuts.org
Subject: Re: Meeting minutes
What's the time limit for getting BYO orders in? I'd like to get in on the club rate... but I know that's not available unless I'm a member of the club, and I'd like to meet some members of the club before I commit my hard-earned money (and face the wrath of my wife)...
As an aside, I work in Rockwell Collins' main plant, in case there's anyone active in the forums that is there as well.
T. Powersox
Post generated using Mail2Forum (http://www.mail2forum.com)
We look forward to meeting you, and I’m sure from what I know your conference room (3rd base) will get you set for any wrath of your wife. We have lots of Rockwellians in the club, so I’ll have to confirm with them if its hard earned money or not. But if it is, I have their hard earned money and this years welcome packet for the club BYO bulk discount in front of me. I’d love to have you on it, but I also know I need to expedite this as several folks don’t want to miss the next centerfold issue…on a side note, it would be funny to have a fold out page with a beer and its stats….
Sorry I digress, anyways if you want to join, and I believe you will, then I can try and meet you sometime soon to get info and payment, if not the brew club is still worth it and before you know it, we will be running another BYO drive.
From: semanticdm [mailto:brew-meetings@crbeernuts.org]
Sent: Tuesday, February 01, 2011 8:16 PM
To: brew-meetings@crbeernuts.org
Subject: Re: Meeting minutes
What's the time limit for getting BYO orders in? I'd like to get in on the club rate... but I know that's not available unless I'm a member of the club, and I'd like to meet some members of the club before I commit my hard-earned money (and face the wrath of my wife)...
As an aside, I work in Rockwell Collins' main plant, in case there's anyone active in the forums that is there as well.
T. Powersox
Post generated using Mail2Forum (http://www.mail2forum.com)
Travis (big T)
X-Prez Nut
X-Prez Nut