Page 2 of 2
Re: Draft supplies for my keezer
Posted: Fri Mar 07, 2014 9:37 am
by brianhall1024
I should probably buy beersmith
Sent from space using Tapatalk.
Re: Draft supplies for my keezer
Posted: Fri Mar 07, 2014 10:01 am
by Matt F
For my setup I make all my beer lines long enough so that I can leave the regulator at 10-12 psi which is good for carbonation and can leave it there for serving too. Keeps things simple.
Re: Draft supplies for my keezer
Posted: Fri Mar 07, 2014 12:04 pm
by brianhall1024
How long is the gas line that you're running?
Sent from space using Tapatalk.
Re: Draft supplies for my keezer
Posted: Fri Mar 07, 2014 1:14 pm
by Matt F
I used your standard beer line tubing 3/16" ID at 5 ft. I now use the stiffer glass lined tubing also 3/16" ID but about 16' long. Seems to work well.
Re: Draft supplies for my keezer
Posted: Fri Mar 07, 2014 1:20 pm
by brianhall1024
Both pushing 10-12psi all the time?
Sent from space using Tapatalk.
Re: Draft supplies for my keezer
Posted: Fri Mar 07, 2014 1:21 pm
by Steven P
Yep
Re: Draft supplies for my keezer
Posted: Sat Mar 08, 2014 10:54 pm
by Matt F
Resistance in the beer line drops the pressure to 2-3psi at the tap.