Club Tap Box

Mr T · Post by **Mr T** » Thu May 05, 2011 12:03 pm

I probably have one or two to donate as well, also I think Travis at 3rd base has a whole dozen or so that I thought he said we could have, so before anyone pulls the trigger, I think we have enough in donations.

From: DaveCo [mailto:brew-members@crbeernuts.org]
Sent: Thursday, May 05, 2011 1:01 PM
To: brew-members@crbeernuts.org
Subject: Re: Club Tap Box

For comparison, here is what Northern Brewer has to offer.

http://www.northernbrewer.com/brewing/kegging/dispensing-hardware?limit=all

Dave

Post generated using Mail2Forum (http://www.mail2forum.com)

brownbeard · Post by **brownbeard** » Thu May 05, 2011 12:07 pm

Mr T wrote:I probably have one or two to donate as well, also I think Travis at 3rd base has a whole dozen or so that I thought he said we could have, so before anyone pulls the trigger, I think we have enough in donations.

I have one to donate as well. I agree, I think we can fix this without spending money.

kjball · Post by **kjball** » Thu May 05, 2011 12:49 pm

I've got 1 to donate

Matt F · Post by **Matt F** » Thu May 05, 2011 12:54 pm

Also, these do not need to be top of the line stainless steel forward seal faucets. They won't do long term storage of beer, just serving events so chrome faucets are fantastic. If we end up with not enough, the cheapest chrome faucet at Rapids is $13.89 with a brass lever and $15.99 with a S/S lever. Not too bad. Glad to hear we have some donations to take care of them. If just the levers are bad, then it may be possible to refurbish some of the faucets. I have not seen them so have no idea.

kjball · Post by **kjball** » Thu May 05, 2011 1:45 pm

umm yeah, just to clarify, mine is a chrome faucet with brass "guts"

Post by **JimPotts** » Thu May 05, 2011 2:44 pm

I'm already in contact with Travis at 3BB to see about getting faucets from him. Stay tuned. -Jim

Post generated using Mail2Forum (http://www.mail2forum.com)

Post by **JimPotts** » Thu May 05, 2011 3:18 pm

Travis will have the faucets for us on Saturday. -Jim

On Thu, May 5, 2011 at 3:44 PM, James Potts <jnpbrew@pottsylvania.com (jnpbrew@pottsylvania.com)> wrote:

I'm already in contact with Travis at 3BB to see about getting faucets from him. Stay tuned. -Jim

Post generated using Mail2Forum (http://www.mail2forum.com)

tompb · Post by **tompb** » Mon May 09, 2011 5:27 pm

I'm folding the cap on Wednesday. 30 1/8 x 7 1/2 to be sure it's big enough. I can overbend a touch to help it fit snug. It'll be a simple 4 bend cap. If the size isn't what we need let me know. I would rather be a touch big then a hair to small.

tompb · Post by **tompb** » Wed May 11, 2011 6:37 pm

Jim will we be able to hook up the coldplate Saturday morning?

Post by **JimPotts** » Wed May 11, 2011 6:55 pm

Sure.
On May 11, 2011 7:37 PM, "tompb" <brew-members@crbeernuts.org (brew-members@crbeernuts.org)> wrote:> Jim will we be able to hook up the coldplate Saturday morning?

------------------------
Runamok Brewing

Jesus must have been a yeast. Who else could turn water into wine?

Post generated using Mail2Forum (http://www.mail2forum.com)

brownbeard · Post by **brownbeard** » Thu May 12, 2011 3:20 pm

Our CO2 manifold