Page 1 of 1
WTB - Electric brewing parts
Posted: Thu Nov 19, 2015 1:06 pm
by czubak
Beginning stages of a basement brewery build and will be needing to buy the following items and thought maybe someone has started and never finished and wanted to sell some misc things. I am on a super tight budget, I will also be hitting the Restore store downtown.
-GFCI Spa panel
-10ga wire (both to run to the spa panel and SJOOW for the element chords)
-Stainless element
Other misc items
-Vent fan
-Utility sink
Re: WTB - Electric brewing parts
Posted: Thu Nov 19, 2015 2:37 pm
by whitedj
Check home depot wiring section for mis-cut soow or sjoow wire..
Re: WTB - Electric brewing parts
Posted: Thu Nov 19, 2015 2:46 pm
by czubak
Thanks Dan. Not too worried there as it's under $2/ft and I doubt I need more than 10' if even that much.
Re: WTB - Electric brewing parts
Posted: Fri Nov 20, 2015 3:31 pm
by bf514921
Let me check what I have lying around, might have half what u need
Sent from my LG-US780 using Tapatalk
Re: WTB - Electric brewing parts
Posted: Fri Nov 20, 2015 6:47 pm
by karl
I've got a 4-foot scrap of the 10-2 SJOOW and about 10 feet of 8-3 THHN that you can have. There's also some 6 AWG THWN, but you probably don't want that...
For the exhaust fan, I scavenged the blower from an old dryer. Works pretty well in the exhaust hood I bodged up using aluminum roof flashing.
Happy hunting!
Sent from my A0001 using Tapatalk
Re: WTB - Electric brewing parts
Posted: Fri Nov 20, 2015 7:46 pm
by czubak
Thanks Karl. Think I'll need 10-3 SJOOW cable. I'll be in touch if I can take the items off your hands.
Sent from my iPhone using Tapatalk