Page 1 of 1

January 2016 Meeting at Brick's

Posted: Tue Jan 19, 2016 7:12 pm
by daryl
Join us Thursday, January 21st at Bricks Bar & Grill for our monthly meeting.
Social begins ~7:00
Meeting will begin ~8:00

Turn in your entries of American Stout for the January Club Competition.

Standard rules for competition entry should be followed. http://www.crbeernuts.org/phpBB3/viewto ... f=7&t=2677

-Two unmarked 12oz or one bomber/750ml bottle without adornment. If your cap has markings on it please deface them

-Bottles should be clearly marked and the Bottle ID form is recommended to be used.

Please attach the form to the bottles using a rubber band. No tape please.

Same rules as usual, Public is welcome. You may bring home brew to share or for critique. Looking forward to seeing everyone there!

Re: January 2016 Meeting at Brick's

Posted: Wed Jan 20, 2016 1:07 pm
by czubak
I have the milk crate and printed 20 entry forms that I will put in there for you Daryl. Should last a while. I think we will need judging forms though.

Re: January 2016 Meeting at Brick's

Posted: Wed Jan 20, 2016 1:16 pm
by tony b
Since I am not entering this one, I am available to help judge.

Re: January 2016 Meeting at Brick's

Posted: Thu Jan 21, 2016 10:09 am
by UndeadFred
Bummer.. my Stout needs about two more weeks. :) Thought it would but I sampled some and it's green. No luck.

See you guys there tonight. I have a year old mead and a bottle of Korean Makkgeolli (which might be an acquired taste for most) to sample.

Fred

Re: January 2016 Meeting at Brick's

Posted: Thu Jan 21, 2016 10:26 am
by andrewmaixner
can't hurt to bottle a couple, it can carb and age while waiting for the judging.

Re: January 2016 Meeting at Brick's

Posted: Thu Jan 21, 2016 10:44 am
by Matt F
andrewmaixner wrote:can't hurt to bottle a couple, it can carb and age while waiting for the judging.
I agree. Judging will probably be a few weeks out. Takes some time to get folks together for it.

Re: January 2016 Meeting at Brick's

Posted: Sat Jan 23, 2016 2:54 pm
by whitedj
For New members:
If you need access to the members only forum please post below or PM me and I'll ensure you get access.