Brewing saturday april 2

[bf514921]

Brewing saturday, Brewing a clone of avery Ellies Brown. Starting mash around 10am I brew electric, all grain if anyone has interest in how that is set up or how it kinda works. i have a a few dogs but they are very friendly.

If your curious about pumps or counterflow chiller or just electric brewing, feel free to stop by.

I plan to start around 10am, and a brew day usually takes a good 5 hours start to finish.

feel free to stop by anytime. the brewery is in the basement, just come on in the garage door


hope to see you saturday
Phone 319-560-4205
Address is 4850 Prairieburg Rd Anamosa Ia 52205.
Its really just south of a small town called prairieburg.

[Matt F]

I am surprised you have an Anamosa address. Are you in Jones county?

[bf514921]

Nope, I wish I was in Jones county, friend of mine to the north has a monticello address, still in linn county

Sent from my LG-US780 using Tapatalk

[mjensen52402]

I want to brew tomorrow and Sunday, but my mill died. I have ordered a new mill, but it will not arrive until Tuesday. If anyone is willing to let me use your mill please let me know. I will just bring grains to your house in a bucket, run them through your mill and be gone.

[bf514921]

You are more than welcome to stop at my place, I have a barley crusher, set at factory gap, not sure how close of a drive it would be for you

Sent from my LG-US780 using Tapatalk

[karl]

You can use mine if you like. It's a JSP Maltmill set to pretty close to factory. I'm on the southeast side of CR near Bever Park.

Sent from my A0001 using Tapatalk

[daryl]

Has the Kraken assimilated to the new appendage?

[TappedOut]

You're welcome to use mine, too. SE side, apparently not that far from karl. I have a Barley Crusher, w/ a narrow gap (works great for batch sparging w/ a hose braid) and a Harbor Freight drill.

[Matt F]

You are welcome to mine too. Only home tonight from 5-6:30 though. Crankenstein 2-roller mill, drill power, standard gap.

[bf514921]

Yep, it's installed as the new hot liquor tank, repositioned things too, with biggr kettle I have room for a herm, I will post a pic tonight

Sent from my LG-US780 using Tapatalk

[bf514921]

I also moved everything, have a stainless steal table, and a at it plate, little more painting t to, I has been upgrading

Sent from my LG-US780 using Tapatalk

[bf514921]

I also moved everything, have a stainless steal table, and a at it plate, little more painting t to, I has been upgrading

Sent from my LG-US780 using Tapatalk

I meant a stir plate, and by move every thing I meant pumps and chiller

Sent from my LG-US780 using Tapatalk

[bf514921]

It's a little less Kracken but I do have almost matching kettles

uploadfromtaptalk1459551193744.jpg

(57.36 KiB) Downloaded 52 times

Sent from my LG-US780 using Tapatalk

[bf514921]

Thanks to Randy for hanging out and putting up with my dogs. Was a good time. Enjoyed talkin beer

Sent from my LG-US780 using Tapatalk