Cedar Rapids Brewing Society

Brewing saturday, Brewing a clone of avery Ellies Brown. Starting mash around 10am I brew electric, all grain if anyone has interest in how that is set up or how it kinda works. i have a a few dogs but they are very friendly.

If your curious about pumps or counterflow chiller or just electric brewing, feel free to stop by.

I plan to start around 10am, and a brew day usually takes a good 5 hours start to finish.

feel free to stop by anytime. the brewery is in the basement, just come on in the garage door


hope to see you saturday
Phone 319-560-4205
Address is 4850 Prairieburg Rd Anamosa Ia 52205.
Its really just south of a small town called prairieburg.

I am surprised you have an Anamosa address. Are you in Jones county?

Nope, I wish I was in Jones county, friend of mine to the north has a monticello address, still in linn county

Sent from my LG-US780 using Tapatalk

I want to brew tomorrow and Sunday, but my mill died. I have ordered a new mill, but it will not arrive until Tuesday. If anyone is willing to let me use your mill please let me know. I will just bring grains to your house in a bucket, run them through your mill and be gone.

You are more than welcome to stop at my place, I have a barley crusher, set at factory gap, not sure how close of a drive it would be for you

Sent from my LG-US780 using Tapatalk

You can use mine if you like. It's a JSP Maltmill set to pretty close to factory. I'm on the southeast side of CR near Bever Park.

Sent from my A0001 using Tapatalk

Has the Kraken assimilated to the new appendage?

You're welcome to use mine, too. SE side, apparently not that far from karl. I have a Barley Crusher, w/ a narrow gap (works great for batch sparging w/ a hose braid) and a Harbor Freight drill.

You are welcome to mine too. Only home tonight from 5-6:30 though. Crankenstein 2-roller mill, drill power, standard gap.

Yep, it's installed as the new hot liquor tank, repositioned things too, with biggr kettle I have room for a herm, I will post a pic tonight

Sent from my LG-US780 using Tapatalk

I also moved everything, have a stainless steal table, and a at it plate, little more painting t to, I has been upgrading

Sent from my LG-US780 using Tapatalk

bf514921 wrote:I also moved everything, have a stainless steal table, and a at it plate, little more painting t to, I has been upgrading

Sent from my LG-US780 using Tapatalk

I meant a stir plate, and by move every thing I meant pumps and chiller

Sent from my LG-US780 using Tapatalk

It's a little less Kracken but I do have almost matching kettles Sent from my LG-US780 using Tapatalk

Thanks to Randy for hanging out and putting up with my dogs. Was a good time. Enjoyed talkin beer

Sent from my LG-US780 using Tapatalk